SICE S 58 LL, Инструкция по эксплуатации

Страница: 82 / 256

82 - English - Operator's manual
WARNING
If the by-pass coil (YV1) or the electronic
card have problems, the wheel can still
be released from the turntable. Set the
switch X (fig.44) (normally set to 0) to 1
(Stand-By function off). At this point, the
control unit motor will always be running.
Adjust the bypass coil (fig.45) and then
the respective solenoid valves (fig.49)
with a screwdriver to set the machine
to emergency operation. In this way,
the locked wheel can be released. Then
contact technical assistance.
WARNING
The "Spare parts" handbook does not
authorise users to carry out work on
the machine with the exception of those
operations expressly described in the
user manual. It only enables users to
provide the technical assistance service
with precise information in order to
minimise delays.
OPERATING MODES
Table 1 summarises the machine's operating modes.
Table 1 – Operating modes
Mode
ALARM LED
(red)
Led
RX ON
(white)
Led
CABLE
(green)
DISPLAY Access
level
Notes
NOR-
MALM-
ODE
off Flashes
upon ar-
rival of the
commands
On with a
steady light
if the cable
is con-
nected;
otherwise
it is off
Variable
messages
FINAL
USER
Standard work
mode
45
44