SICE PT 150 E, Руководство оператора

Страница: 46 / 72

46
Operator's manual PT 150 E
3. INSTALLATION
The PT 150 E may only be installed by qualified personnel with authorisation from
the constructor. Installation by unqualified personnel will render the warranty cov-
ering the unit null and void.
3.1. INSTALLATION AREA
Install the machine in compliance with all the applicable safety standards, including,
but not limited to, those issued by OSHA.
RISK OF EXPLOSION OR FIRE.
Do not use the machine in areas that could be exposed to inflammable vapours (petrol,
paint solvents, etc.). This machine must not be installed in a pit or below floor level.
HAZARD
IMPORTANT: for correct, safe use of the equipment, users must ensure a lighting level of
at least 300 lux in the place of use.
Do not install the machine outdoors. This machine is intended for use in a suitably
sheltered indoor area.
Install the machine in the chosen location, ensuring that the minimum clearances indicated in
Fig.2 are maintained.
The support surface must have a
load-bearing capacity of at least
1000 kg/m
2 .
Environmental work
conditions
- Relative humidity 30% ÷ 95%
without condensation.
- Temperature 0°C ÷ 50°C.
ATTENTION
WARNING
ATTENTION
2