SICE PT 150 E, Руководство оператора

Страница: 40 / 72

40
Operator's manual PT 150 E
12. Never leave nuts, bolts, tools or other materials on the machine. These may become
trapped between moving parts and cause damage to the machine itself.
13. DO NOT install or inflate tyres that are cut, damaged, decayed or worn. DO NOT mount
tyres on bent, rusted, worn, warped or otherwise damaged rims.
14. Do not attempt to finish the mounting procedure if the tyre is damaged during the
procedure itself. Remove the tyre from the service area and mark it as damaged.
15. Inflate tyres in gradual steps, while continuously monitoring the pressure and observing
the tyre itself, the rim and the bead. NEVER exceed the pressure limits indicated by the
manufacturer.
16. The internal parts in this machine could create contacts or sparks if exposed to flam-
mable vapours (petrol, paint thinner, solvents, etc.). This machine must not be installed
in a pit or below floor level.
17. Do not operate the machine while under the influence of alcohol, medicine or drugs. If
you are taking prescription or non-prescription medicine, contact a physician to understand
the side effects that the medicine could have on the ability to operate the machine safely.
18. Always use OSHA, CE approved and authorised personal protective equipment (PPE)
or equipment with equivalent certification while operating the machine. Consult your su-
pervisor for additional instructions.
19. Do not wear jewellery, watches, loose clothing, ties and tie back long hair before using
the machine.
20. Wear protective, non-slip footwear when operating the tyre changer.
21. While positioning, lifting or removing wheels from the tyre changer, wear a suitable back
support and use a correct lifting technique.
22. Only suitably trained personnel can use, service and repair the machine. Repairs may
only be performed by qualified personnel. The maintenance supervisor must be have ap-
propriate specific qualification. Before an operator may perform a repair on the machine, the
employer must determine if the operator is suitably qualified to carry out the repair safely.
23. The operator must read and observe the indications of all warning labels applied to the
equipment before starting to use the equipment itself.
24. DO NOT clamp the rim on the turntable during inflation.