SICE PSR 43 CT LT, Инструкция по эксплуатации

Страница: 25 / 54

UK
Operator’s manual 79
CAUTION
Keep the working area clean.
Never use compressed air, water jets or aggressive chemical substances to remove
dirt or traces from the machine.
When cleaning, try as far as possible to avoid generating or raising dust.
Maintenance by unauthorised staff is strictly forbidden.
To ensure the machine remains in good working order and operates correctly, it is essen-
tial to follow the instructions given below, carrying out cleaning and routine maintenance
every 1000 working hours.
Routine cleaning and maintenance operations must be carried out in accordance with
the instructions given below:
- Cleaning and maintenance operations must be carried out in conditions of maximum
safety, setting the lift in a mechanically safe position.
- Turn the master switch to zero ‘0’ and disconnect the machine’s electrical contacts.
- Change the hydraulic fluid in the control unit tank (capacity 15 l) about every 1,000
working hours, using the fluids recommended in the table below:
SUPPLIERS NAMES HYDRAULIC CONTROLS GREASE LUBRICATION
API CIS 32 PIGREASE LT-S
MOBILOIL DTE24 MOBILPLEX 46
SHELL TELLUS 25 ALVANIA EP 1
ESSO NUTO HP 32 BEACON EP 1
BP ENERGOL HLP65 ENERGREASE LS 1 EP
AGIP OSO 35 GR.MU EP 1
FINA HYDRAN 31 MARSON EPL 1
- Clean the lift, taking special care over any outside objects which might cause malfunc-
tions of the mechanical and electrical safety devices.