SICE PSR 43 CT LT, Инструкция по эксплуатации

Страница: 13 / 54

UK
Operator’s manual 67
Hydraulic system connection
Proceed as follows to connect the lift hydraulically to the control unit:
1. Remove the control unit door by unscrewing the 4 fixing screws
2. Remove the protective cover
3. Extract the hydraulic pipes under the main lift runways.
4. Remove the hydraulic plugs from the hydraulic control unit unions.
5. Connect the hydraulic lines to the control unit, matching the numbers on the lines
correctly with the numbers indicated in figure 8, and tightening correctly.
6. Connect the fluid recovery lines R (figure 8_1).
N.B.: When all the pipes R have been connected, open the cock A (fig.8_1).
8
A
AT
B
BT