SICE PSR 43 CT LT, Инструкция по эксплуатации

Страница: 21 / 54

UK
Operator’s manual 75
0 MASTER SWITCH
Simply turn the power switch clockwise to switch on the control unit (from 0 to 1).
The switch may be padlocked in position "0" to prevent unauthorised use of the lift.
1 SAFE PARKING BUTTON/MAIN LIFT QUICK POSITIONING
This button has 2 functions
a - if the button is directly pressed, the lift starts the descent without raising the mechani-
cal safety devices claws to make the lift stand on the mechanical safety devices;
b - if the button F is pressed and held down and then button 1 is pressed, the lift will
descend immediately, without raising again.
2 MAIN LIFT UP BUTTON
By pressing this button, the lift starts its raising stroke.
3 MAIN LIFT DOWN BUTTON
By pressing this button, the lift raises for about 1.5 seconds to disengage the mechanical
safety device and then starts the descent stroke.
4 LIGHT
BUTTON
By pressing this button, the lighting system lights turn on / off (OPTION).
5 BUTTON
F
Allows the button second function usage, where available.
6 BUTTON
-
Not used.
7 BUTTON
+
Not used.
8 SAFE PARKING BUTTON/FREE-WHEEL LIFT TABLE QUICK POSITIONING
This button has 2 functions
a - if the button is pressed directly, the lift begins to descend but without raising the
pawls of the mechanical safety devices, and the built-in lift table will remain held on
the mechanical safety devices;
b - if button F is pressed and held and then button 8 is pressed, the built-in lift table will
descend immediately without performing the return ascent stage.
9 FREE-WHEEL LIFT TABLE UP BUTTON
By pressing this button, the free-wheel lift table starts its raising stroke.
10 BUILT-IN LIFT TABLE (LT) DOWN BUTTON
By pressing this button, the free-wheel lift table raises for about 1.5 seconds to disengage
the mechanical safety device and then starts the descent stroke.
11 POWER ON LED INDICATOR (ORANGE)
The light comes on to indicate that the control unit is receiving power.
12 LED INDICATOR OK (GREEN)
Not used.
13 LED INDICATOR ALARM1 (RED)
The indicator lamp illuminates to indicate a fault or malfunction of the vehicle lift.
Read the Chapter: PROBLEM-SOLVING AND TROUBLESHOOTING
14 LED INDICATOR ALARM2 (RED)
The indicator lamp illuminates to indicate a fault or malfunction of the vehicle lift.
Read the Chapter: PROBLEM-SOLVING AND TROUBLESHOOTING
15 LCD DISPLAY
The LCD display is only included on certain versions of the lift and displays information
relative to the current state of the lift and/or alarm conditions.