Siborg LCR-Reader MPA, Руководство пользователя

Страница: 3 / 28

© Copyright Siborg Systems Inc.
2
7.8.2 Sound 18
7.8.3 Display 18
7.8.4 Serial Number 19
7.8.5 Default 19
8 Device Troubleshooting 19
8.1 If the device does not turn on 19
8.2 If there are no initial readings on the screen 19
8.3 Technical Support 19
9 Maintenance 20
9.1 General care of the device 20
9.2 Repairs 20
10 Storage Conditions 20
11 Transportation 20
12 Warranty 20
13 Specifications 21
13.1 Overview 21
13.2 FCC Compliance 22
13.3 General Information 22
13.4 Details of the Measurement Modes 22
13.4.1 Test Signal Generator 22
13.4.2 Resistance 22
13.4.3 DC Resistance 23
13.4.4 Capacitance 23
13.4.5 DC Capacitance Measurement 24
13.4.6 Inductance 24
13.4.7 DC Voltage 24
13.4.8 AC Voltage 24
13.4.9 Low Frequency DDS Signal Generator 25
13.5 Supplement A 25
13.6 Supplement B 26
1 Device Use
1.1 Main Features
•
Automatic component recognition L-C-R-Diode
•
Basic Accuracy of 0.1%
•
DC measurement of Resistance and Capacitance up to 1 F
•
Pass/No Pass Electrolyte Cap indication with Built-in Rejection
table
•
Automatic/manual frequency setting 100, 120 Hz, 1, 10, 20, 30,
40, 50, 60, 75,100 kHz
•
Automatic adjustment of test signal to 0.1 V peak-to-peak for
in-circuit measurements
•
Designated ESR measurements
•
Easy Open/Short calibration for better measurement accuracy
•
Automatic detection of diode polarity and short circuit
•
AC/DC voltage measurements
•
Frequency meter