Siborg LCR-Reader MPA, Руководство пользователя

Страница: 18 / 28

17
© Copyright Siborg Systems Inc.
7.5 Transient Voltage Waveforms (Oscilloscope Mode)
In this mode, you can view the
voltage waveform. On the right
side of the screen, the horizontal
scale (T / pixel), vertical scale (V /
div), signal frequency and signal span are displayed.
7.5.1 Oscilloscope mode settings
Usually automatic parameter settings are sufficient. The two
parameters that can be adjusted manually are the time scale
(T/pix) and the voltage scale (V/div).
• Push the joystick to the right for 1 beep to increase parameter .
• Pu sh the joystick to the left for 1 beep to decrease parameter.
• Push the joystick up or down for 1 beep to select the
parameter to change: T/pix or V/div.
• Push the joystick to the left for 2 beeps to automatic selection
of T/pix (V/div).
7.6 Frequency Meter Mode
In this mode, it is possible to measure frequency, pulse duration,
duty cycle, period and count the number of pulses.
7.6.1 Changing the sub-mode
Push the joystick to the right for 1 beep to open menu to select
the desired sub-mode: frequency, period, counter, duty cycle
and pulse duration. When the mode is selected, hold for 2 beeps
to make it the default sub-mode for the Frequency meter.
7.6.2 Frequency, Period control
Push the joystick to the left for 1 beep to change the
measurement time cyclically 0.25s-0.5s-1s-2s. Push the joystick
to the right for 1 beep to return to the Frequency main menu.
Push the joystick to the left for 1
beep to reset the counter to 0.
Push the joystick to the right for 1
beep to return to the Frequency main menu.
Push the joystick to the left for 1
beep to measure duration of a
positive or negative pulse. Push the
joystick to the right for 1 beep to return to the Frequency main
menu.
Push the joystick to the right for 1
beep to return to the Frequency