Siborg LCR-Reader MPA, Руководство пользователя

Страница: 2 / 28

1
© Copyright Siborg Systems Inc.
1 Device Use 2
1.1 Main Features 2
2 What is included in the package 3
3 Symbols and Abbreviations 3
4 Principle of Operation 3
4.1 Calculation of Parameters: 4
5 Safety Measures and General Instructions 5
6 Device Controls 6
6.1 Turning on the Device 6
6.2 Turning Off the Device 6
6.3 Controlling Device Using Its Orientation 6
6.4 Charging the Battery 7
6.5 Main and System Menu 7
7 Modes of Operation 8
7.1 R-L-C-D Mode 8
7.1.1 Measurements 9
7.1.2 Quick Controls 10
7.1.3 Relative (Tolerance) Measurements 10
7.1.4 Open/Short Calibration 10
7.1.5 Capacitance Offset Calibration Board 11
7.2 R-L-C-D mode menu 11
7.2.1 Primary Parameter 11
7.2.2 Secondary Parameter 12
7.2.3 Test Frequency 12
7.2.4 Test Signal Level 12
7.2.5 Period 12
7.2.6 SER/PAR Mode 12
7.2.7 Sound 13
7.2.8 Cap-Voltage 13
7.2.9 Sample Hold 13
7.2.10 Default 13
7.2.11 Large Cap 14
7.2.12 Large Cap (0.5 μ F to 40 mF) Settings 14
7.2.13 Super Large Cap > 40 mF Measurement 14
7.3 RDC+LED Mode 15
7.3.1 Auto Mode 15
7.3.2 Diode Mode 15
7.3.3 R test at 1.3 V and R test at 100mV 15
7.4 Voltage Mode 16
7.4.1 Controls 16
7.5 Transient Voltage Waveforms (Oscilloscope Mode) 17
7.5.1 Oscilloscope mode settings 17
7.6 Frequency Meter Mode 17
7.6.1 Changing the sub-mode 17
7.6.2 Frequency, Period control 17
7.7 Signal Generator Mode 18
7.7.1 Controls 18
7.8 System Menu Entries 18
7.8.1 Power 18