Siborg LCR-Reader MPA, Руководство пользователя

Страница: 23 / 28

© Copyright Siborg Systems Inc.
22
Maximum Resolution (DC) 1 mV
Input DC+AC
Input Impedance 10 M Ω
Frequency
Frequency 25 Hz – 100 kHz
Measuring Time 0.25 s, 0.5 s, 1s, 2s
Maximum Resolution 0.0001 Hz
Sensitivity 0.25 V
Accuracy ±(0.005%+5) Hz
Input Impedance 10 M Ω
Signal Generator
Waveform Sine
Maximum Frequency 100 kHz
13.2 FCC Compliance
Complies with ICES-003 Issue 6 and FCC Part 15.109. ETC Report produced by MPB
Technologies No.: s57e17a242 Release 1 of August 30, 2017.
13.3 General Information
Type of Indicator
Monochrome graphic LCD display with
backlight
Power
Battery Lithium-Polymer (Li-Poli) 3.7 V 250 mAh
Typical Recharge Time 3 hours
Continuous Use Time Over 7 hours (without backlight)
Auto-off 10 - 990 seconds (default 120s)
Use Conditions 10 - 40⁰С and relative humidity up to 80%
Dimensions
Device 166x23x14 mm
Case 180x40x20 mm
Unit Weight 39 g (1.35 Oz)
Weight of the Device and Case 105 g (3.6 Oz)
13.4 Details of the Measurement Modes
13.4.1 Test Signal Generator
Test Frequency
100, 120 Hz, 1, 10, 20, 30, 40,50, 60,
75, 100 kHz
DC Voltage
Frequency Accuracy 0.005% -
Test Signal Level
1.0±0.05 Vrms, 0.5±0.02 Vrms,
0.1±0.01 Vrms, 0.1±0.01 V* ±1.3±0.1, ±3.2±0.1,
0.1±0.01 V
Source Impedance 100 Ω 5%
*Automatically set signal level for in-circuit measurement, lower accuracy 10% + 5.
13.4.2 Resistance
Test signal 1.0 Vrms
R
an
ge
R
e
so
lu
ti
on
Test frequency
Eq
u
iv
al
e
n
t
C
ir
cu
it
100Hz, 120Hz 1 к Hz 10 к Hz 20 к Hz-100 к Hz
10Ω 0.001Ω 0.5%+20 0.2%+20 0.5%+20 1%+20 Series
100Ω 0.01Ω 0.1%+3 0.1%+3 0.1%+3 0.5%+3 Series
1 кΩ 0.1Ω 0.1%+3 0.1%+3 0.1%+3 0.2%+3 Series
10 кΩ 0.001 кΩ 0.1%+3 0.1%+3 0.1%+3 0.2%+3
Series,
Parallel
100 кΩ 0.01 кΩ 0.1%+3 0.1%+3 0.1%+3 0.5%+3 Parallel
1MΩ 0.1 кΩ 0.2%+3 0.2%+3 0.2%+3 1%+3 Parallel
10MΩ 0.001MΩ 1%+5 0.5%+5 1%+5 - Parallel
20MΩ 0.01MΩ 3%+5 3%+5 - - Parallel