Shure Incorporated
36/44
3.
4.
1.
2.
3.
4.
5.
Mask the entire flat area in the center of the back cover. Mask the 7 tabs on the inside of the back cover to keep paint
out of the screw threads.
Paint the outside of the back cover.
Step 3: Reassemble the Microphone
Let the paint dry before reassembling.
Use the 12 screws to attach the back cover to the processor.
Use the 7 screws to reattach the aluminum support panel.
Reinstall the lightpipe on the grille by snapping it into place.
Attach the fabric piece to the grille.
Align the grille with the 7 tabs on the back cover. Set it down and rotate the grille as shown to engage the tabs.
