Shure Incorporated
16/44
•
•
•
•
•
•
•
•
•
1.
2.
3.
Round mounting options:
Suspend from ceiling with A900-GM
Suspend from ceiling with your own hardware
NOTICE
Due to a preliminary finding by a federal court in the United States, Shure is authorized to ship the MXA920-S-60CM. This
model is fully certified and lawful to use anywhere in the world, but is not lawful to be used in the United States in a drop ceiling
mounting configuration such as shown below. It is also unlawful to use adapters in an attempt to fit this smaller version into a
ceiling grid in the United States such that it mounts substantially as shown below.
Furthermore, the MXA920S60CM is not designed or intended to be installed within a 24” ceiling grid, which is the standard
grid size in North America. Mounting in such a grid in the above-shown configuration is unsafe and may cause damage to the
product and/or injury to those below. The MXA920-S-60CM is safe and lawful for use in other mounting configurations, such as
with hard ceilings, or suspended from a VESA pole or suspension wiring, anywhere in the world.
Installing in a Ceiling Grid
Before you begin:
Remove the plastic cover from the microphone.
If using, install the rubber pads on the corners of the microphone to prevent scratches.
Verify that your ceiling grid size matches your model variation.
If using the A910-JB junction box, install it before ceiling installation.
IMPORTANT:
Do not install the 60 cm model in a 2 foot (609.6 mm) ceiling grid.
Make space in the ceiling grid for the array microphone to be installed.
Route the Ethernet cable above the ceiling grid and through the opening in the ceiling.
Plug the Ethernet cable in to the microphone.
