USER MANUAL
11
7.4
、
EASY REMOTE CONTROL MODE
：
z
Press “
FUNC
” button till to the “
CA8
” letter is shown on LED DISPLAY.
z
Press “
ENTER
” to select this “
CA8
” mode.
When “
CA8
” mode is selected, the laser is operating in EASY REMOTE
CONTROL MODE. It could be controlled by the optional CA-8 easy controller
as function list below. The laser is operating this mode until next setting.
z
STAND BY button:
Used to set the connected unit in blackout mode. The LED is on when the
unit is set to blackout.
z
MODE / FUNCTION button:
Press the MODE button to toggle the different modes:
{
MODE LED is off:
The unit is in “full automatic” mode. The Function
Button is not used.
{
MODE LED is on;
The unit is in “manual pattern select” mode. One of
the24 the build-in patterns can be selected with the FUNCTION button.
