USER MANUAL
8
6. Earth Enclose:
Used to connect to the earth.
7. Easy Controller:
Used to connect to optional easy controller CA-8.
8. COOLING FAN:
used to cool the components inside the enclosure. Make sure
to never cover this fan outlet!
9. LED DISPLAY:
Show the operating mode and DMX address
10. Control Panel:
Used to set operating mode and DMX address
11. DMX OUTPUT:
3pin female XLR-connector used to connect the space color
laser with the next unit in the DMX chain.
12. DMX INPUT:
3pin male XLR- connector used to connect universal
DMX-cables. This input receives instructions from a DMX-controller.
6.2 Front panel of the fixture
13. POWER LED:
indicates that the unit is switched on.
14. MUSIC LED:
flashes to the sound of the music detected by the mic.
15. LASER OUTPUT:
here the laser beam leaves the enclosure, make sure to
never look inside the unit through this opening while the laser effect is
switched on!
16. HANGING BRACKTET:
with 2knob on both sides to fasten the unit and a
mounting hole to fix a mounting hook.
