USER MANUAL
10
7.2 AUTO RUNNING STAND-ALONE MODE:
z
Press “
FUNC
” button till to the “
AUT
” letter is shown on LED DISPLAY.
z
Press “
ENTER
” to select this “
AUT
” mode.
When “
AUT
” mode is selected, the laser is operating in AUTO RUNNING
STAND-ALONE MODE. It is running laser show with preprogram. The laser is
operating this mode until next setting.
7.3
、
SLAVE MODE
z
Press “
FUNC
” button till to the “
SLA
” letter is shown on LED DISPLAY.
z
Press “
ENTER
” to select this “
SLA
” mode.
When “
SLA
” mode is selected, the laser is operating in SLAVE MODE. Connect
the SLAVE MODE laser to MASTER MODE laser (either Auto or Music mode)
with standard DMX512 cable, the SLAVE MODE laser is running laser show
exactly as the MASTER MODE laser does. The laser is operating this mode until
next setting.
