USER MANUAL
7
Building a master/slave-chain:
Connect the DMX-output of the master fixture in the data-chain with the
DMX-input of the first slave, Always connect output with the input of the next slave
until all slaves are connected.
Caution:
It’s necessary to insert the XLR termination plug (with 120Ohm) into the
input of the master fixture and into the output of the last slave fixture in the link in
order to ensure proper transmission on the data link.
6. DESCRIPTION:
6.1 Back panel of the fixture
1. POWER Switch:
Switch on and off the power
2. MAINS INPUT:
with IEC socket and integrated fuse holder, connect the
supplied mains cable here.
3. INTERNAL MICROPHONE:
the built- in microphone is used to synchronize the
laser show to the beast of the music
4.
MUSIC INPUT SENSITIVITY:
This potentiometer is used to adjust the music
input sensitivity. Turn the potentiometer until the laser works in sync with the
music.
5. INTERLOCK:
used to connect the optional emergency stop switch (see
picture). When you push this switch the laser beam will disappear
immediately.
