
14
Ordercode: 50701
SM-16/2
Playback (Scenes)
Press and hold down the FIXTURE button (corresponding with the number of the scene you want to run)
and press the AUTO DEL button to release the scene buttons.
Manual Run Scene
When power is first turned ON, the controller will be in manual scene mode. Make sure that the display
shows MANUAL.
01)
Press the BANK UP/DOWN button to select the program bank that stores the scene which you want
to run manually.
02)
Press the SCENE button to run.
Note: If you are in programming mode, you can also press and hold down the PROGRAM button until the
display shows MANUAL again. Manual mode will override running programmes/chases.
Running in Sound-Mode
01)
Press the MUSIC/BANK-COPY button, until the display shows MUSIC.
02)
Change bank programs by pressing the BANK UP/DOWN button, if necessary.
03)
Press the MUSIC/BANK-COPY button to exit.
Note: In sound-mode, programs will be triggered by sound using the unit’s built-in microphone. All scenes
in a bank will chase.
Running in Auto-Mode
01)
Press and hold down the AUTO DEL button until the display shows AUTO.
02)
Change BANK programs by pressing the BANK UP/DOWN buttons, if necessary.
03)
You can adjust the time between steps by moving the SPEED fader. You can also change the
duration of the step – by moving the FADE TIME fader.
04)
While in operation, you can also change banks by pressing the BANK UP/DOWN button.
05)
Programs will be playbacked, as stored in the controller’s memory.
06)
If you want to manually override a fixture channel value, select the fixture and change the value by
moving the sliders. Release the override by pressing and holding down the AUTO DEL button and
pressing the corresponding FIXTURE button.
Notes:
In auto-mode, programs will be triggered by the controller’s fade and speed time, set on the faders.
All scenes in a bank will chase.
Caution! The fade setting should never be slower than the speed setting or the scene will never
complete execution.
To revert the programmed speed and fade time, tap the program button.
Blackout
01)
The BLACKOUT button brings all lighting output to 0 or off (also called the home position of the unit).
Содержание 50701
Страница 20: ...2015 Showtec...