
10
Ordercode: 50701
SM-16/2
Reverse Channel Output (optional setup)
01)
Press and hold down the PROGRAM & TAPSYNC buttons together twice, to access the channel
assignment mode, then press the FIXTURE button.
02)
Move the SPEED fader until you arrive at the controller channel, which you wish to alter.
03)
Move the FADE TIME fader all the way up until N changes to Y. If you wish to copy a scanner’s
reverse channel assignments to another scanner, continue by following steps 4-10. If you do not wish
to do this, press and hold down the PROGRAM & TAPSYNC buttons twice, to exit mode.
Example: Copying Scanner 1 into Scanner 2
04)
Press and hold down FIXTURE button # 1.
05)
While holding button # 1, press FIXTURE button # 2.
06)
While holding FIXTURE buttons # 1 and # 2, press and hold down the MIDI/ADD button.
07)
Release FIXTURE button # 1 first, before releasing FIXTURE button # 2.
08)
Release the MIDI/ADD button.
09)
All FIXTURE LED indicators will flash to confirm successful copy.
10)
Press and hold down the PROGRAM & TAPSYNC buttons twice, to exit mode.
Fade Time Assignment (optional setup)
You can choose whether the board’s fade time (during scene execution) is implemented broadly to all
output channels or only to the Pan and Tilt movement channels. This is relevant because you will often
want gobos and colors to change quickly, while not affecting the movement of the light.
01)
Turn OFF the controller.
02)
Press and hold down the BLACKOUT and TAPSYNC buttons.
03)
Turn ON the controller.
04)
Press the TAPSYNC button to toggle between the two modes: all channels (A) or the selected
channels.
05)
Press the MIDI/ADD button to save your settings. All LEDs will blink to confirm.
Содержание 50701
Страница 20: ...2015 Showtec...