
11
Ordercode: 50701
SM-16/2
Programming
A program (bank) is a sequence of different scenes (or steps) that will be called up one after another.
The SM-16/2 allows you to create up to 30 programs, each consisting of 8 scenes.
Entering Program Mode
Press and hold down the PROGRAM button for 3 seconds until PROGRAM is displayed. This indicates that
the user is in programming mode.
Create a Scene
A scene is a static lighting state. Scenes are stored in banks. There are 30 bank memories on the
controller and each bank can hold 8 scene memories. The SM-16/2 can save 240 scenes in total.
01)
Press and hold down the PROGRAM button for 3 seconds.
02)
Select a FIXTURE to program.
03)
Move the FADERS to adjust the devices’settings, such as colors and gobos. Press the PAGE SELECT
button to access Channels 17~32 on the faders.
04)
To program another fixture, press the FIXTURE button corresponding with the fixture which you have
just programmed. Now press another FIXTURE button to program.
05)
Repeat steps 2~4 until you have reached a satisfying result.
06)
Move the SPEED and FADE faders to achieve the desired amount of time during which a scene will
be held in a chase (SPEED) and the amount of time allowed for the fixtures to move from one scene
to the next (FADE).
07)
Tap the MIDI/ADD button.
08)
Choose one BANK (01~30). Press the Up and Down arrow bank buttons to change if necessary.
09)
Select the desired SCENE button to store. All LEDs will blink. The display will now display the bank and
the scene number that is stored.
10)
Repeat steps 2-9 to record more scenes. (Read the notes below)
11)
To exit program mode, press and hold down the PROGRAM button for 3 seconds. The controller will
return to blackout, when exiting the programmer.
Notes:
Deselect BLACKOUT if LED is lit.
A FIXTURE button represents one lighting fixture.
You can access channels 17~32 by pressing the PAGE SELECT button. This is necessary for fixtures that
use more than 16 control channels. When switching pages, it will be necessary to move previously
moved faders up and down to activate.
Pressing the same FIXTURE button again will hold the parameters changed for that fixture in the
program scene.
There are 8 scenes available in each bank.
Edit a Scene
01)
Press and hold down the PROGRAM button for 3 seconds.
02)
Locate the scene in the program BANK. Press the BANK UP/DOWN button to navigate through the
program banks.
03)
Select the SCENE in the program BANK to edit.
04)
Move FADERS to adjust the effects.
05)
Press the MIDI/ADD button. Press the previously selected SCENE button again.
06)
To exit program mode, press and hold down the PROGRAM button for 3 seconds. The controller will
default to a BLACKOUT, when exiting program mode.
Содержание 50701
Страница 20: ...2015 Showtec...