SHOWTEC 50701, Руководство пользователя, Страница: 14 / 20

13
Ordercode: 50701
SM-16/2
Chase Programming
A chase is created by using previously created scenes. Scenes become steps in a chase and can be
arranged in any order you choose. It is highly recommended that prior to programming chases for the
first time; you delete all chases from memory. See “Delete All Chase Programs” for more information (see
page 13).
Create a Chase
A Chase can contain 240 scenes as steps. The terms “steps” and “scenes” are used interchangeably.
01)
Press and hold down the PROGRAM button for 3 seconds.
02) Press the CHASE (1~6) button which you wish to program.
03) Change the BANK, if necessary to locate a scene.
04) Select the desired SCENE which you want to insert.
05) Tap the MIDI/ADD button to store your setting. All LEDs will flash 3 times.
06) Repeat steps 3-5 to add additional steps in the chase. You can record up to 240 steps.
07) Press and hold down the PROGRAM button for 3 seconds to save the chase.
Copy Bank Into Chase
01) Press and hold down the PROGRAM button for 3 seconds to enter programming mode.
02) Select the BANK to be copied by pressing the BANK UP/DOWN buttons.
03) Press and hold down the MUSIC/BANK COPY and the MIDI/ADD buttons to copy.
04) Press and hold down the PROGRAM button for 3 seconds to exit programming mode.
Adding a Step To a Chase
01) Press and hold down the PROGRAM button for 3 seconds to enter programming mode.
02) Press the desired CHASE (1~6) button.
03) Press the TAPSYNC/Display button and the display will show the scene and bank number. This will be
the scene, which you will be adding (STEP LED must be on),
04) Press the BANK UP/DOWN buttons to scroll through the chase and arrive at the step number, which
you would like to add or append a scene/step to.
05) Press the MIDI/ADD button and one step number will be added to the previously displayed step
number.
06) Press the SCENE button that corresponds to the scene to be copied.
07) Press the MIDI/ADD button again to add a new step.
08) Press and hold down the PROGRAM button for 3 seconds to exit programming mode.
Delete a Scene/Step In a Chase
01) Press and hold down the PROGRAM button for 3 seconds to enter programming mode.
02) Press the desired CHASE (1~6) button that contains the scene to be deleted.
03) Press the TAPSYNC/DISPLAY button to switch the LED display to steps.
04) Select the scene/step to be deleted by pressing the BANK UP/DOWN buttons.
05) Press the AUTO/DEL button and the respective SCENE button and then release to delete the
step/scene. All LEDs will flash.
06) Press and hold down the PROGRAM button for 3 seconds to exit.
Delete a Chase
01) Press and hold down the PROGRAM button for 3 seconds to enter programming mode.
02) Press the CHASE button (1~6) to be deleted.
03) Press and hold down the AUTO DEL button and the respective CHASE button, then release to delete
the chase. All LEDs will flash.
Note: Scenes will remain programmed on the controller. Only the chase is affected.
Delete All Chase Programs
CAUTION! This procedure will result in irrevocable loss of chase step memory.
The individual scenes and program banks will be preserved.
01)
Press and hold down the BANK DOWN button and the AUTO DEL button while turning OFF the
controller.