SHOWTEC 50335, Руководство пользователя

Страница: 17 / 24

15
2.4 Change the Speed Mode between 5 Minutes and 10 Minutes
1) Press and hold the Record button.
2) Tap the Flash button 5 or 10 three times while holding down the Record button.
3) The 5MIN or 10MIN should light up indicating the Speed slider is set to run in the
5 or 10-minute mode.
Tap 3x
3. MIDI-Operation
3.1 Setting MIDI IN
1) Tap Flash button #1 three times while holding down the Record button,
the Segment Display reads "CHI" indicating MIDI IN channel setup is available.
Tap 3x
2) Tap the Flash button numbered from 1-16 to assign MIDI IN channel 1-16,
the relevant channel LED lights indicating MIDI IN channel is set.
Press and hold down the Record button. While holding down the Record button tap
the Rec Exit button to exit MIDI setting.
3.2 Setting MIDI OUT
1) Tap the Flash button #2 three times while holding down the Record button,
the Segment Display reads "CHO" indicating MIDI OUT channel setup is available.
2) Tap the Flash button numbered from 1-16 to assign MIDI OUT channel 1-16,
the relevant channel LED lights indicating MIDI OUT channel is set.
Press and hold down the Record button. While holding down the Record button tap
the Rec Exit button to exit MIDI setting.