SHOWTEC 50335, Руководство пользователя

Страница: 16 / 24

14
4) Use the Audio Level slider to adjust the music sensitivity.
5) To return to normal mode, tap the Audio button a second time causing its LED goes
out, the Audio mode is disengaged.
2.3.3 Running a Program With the Speed Slider
1) Be sure the Audio mode is disengaged, that is, the Audio LED goes out.
2) Select your program as described above.
3) Move the Speed slider to the SHOW MODE position (the bottom), then tap the
Flash button (13-24) while pressing and holding down the Rec Speed button,
the corresponding program will not run with the Standard beat any longer.
4) Now you may move the Speed Slider to select your desired speed.
Note:
The step 3 is not necessary if the selected program is not recorded with the
Standard Beat.
2.3.4 Running a Program With the Standard Beat
1) Be sure the Audio is disengaged. Tap the Mode Select button to select
CHASE
SCENE-Mode.
2) Tap the Park button to select Mix Chase mode, the LED lights indicating this selection.
3) Select your program as described above.
4) Move the Speed slider until the Segment Display reads your desired value.
You may tap the Tap Sync button twice to define your beat time.
5) While pressing and holding down the REC Speed button, tap the Flash button(13-24)
that stores the program.
6) The program will then run with the set time or beat when engaged.
7) Repeat steps 4 and 5 to set a new beat time.