SHOWTEC 50335, Руководство пользователя

Страница: 15 / 24

13
2.3 Running
2.3.1 Running Chase Programs
1) Tap the Mode Select button to select CHASE SCENE-Mode indicated by the
red LED.
2) Tap the Page button to select the correct page the program you wish to run is located.
3) Push Master Slider B to its maximum position(fully down).
4) Move the desired Channel slider (13-24) to its maximum position to trigger
the program, and the program will fade in depending upon current fade time.
You may press and hold down the relevant Flash button(13-24) to trigger the program.
5) Move the Channel slider to adjust the output of the current program.
2.3.2 Running a Program To Audio
1) Use built-in microphone or plug the audio source into the RCA Audio jack.
2) Select your program as described above.
3) Tap the Audio button until its LED lights, indicating Audio mode is active.