SHOWTEC 50335, Руководство пользователя

Страница: 14 / 24

12
2.2.7 Modify a Step or Steps
1) Enter EDIT-mode.
2) Tap the Step button to scroll to the step you wish to modify.
3) Press and hold the Up button if you want to raise the intensity.
If you want to lower the intensity, press and hold down the Down button.
4) While holding down the Up or Down button, tap the Flash button corresponding
to the DMX channel of the scene you wish to modify until you reach the desired
intensity value read from the Segment Display. Then you may tap the Flash buttons
until you are satisfied with the new scene.
5) Repeat steps 2, 3 and 4 until all the steps have been modified.
6) Exit EDIT-mode.