SHOWTEC 44060, Руководство пользователя

Страница: 17 / 40

16
Ordercode: 44060
EventLITE 4/10 Q4
Sweden 2.4GHz Wireless communication module
Communication distance:
Depending on the transmitting power or transmitter module
Test conditions: W-DMX TRx Transmitter module, 2dBi Antenna, transmitting power
20dBm (100mW)
Range indoor: 60 m (approx. through three concrete walls)
Range outdoor: 250 m
Wireless DMX Connection
The wireless receiving module “Pico G4 Receiver, 2.4GHz”, provided by Swedish WIRELESS SOLUTION, only
has a 2.4 GHz wireless signal receiving function. In order to match the wireless signal, please use the
50175
W-DMX MicroBox F-1 G5 Transceiver by WIRELESS SOLUTION. To control the status of the wireless
communication, please look at the blue LED indicator on the bottom of the fixture.
Wi-Fi Problems:
01)
No connection with a transmitter.
The LED indicator (06) is OFF.
02) Searching for a connection.
The LED indicator (06) blinks quickly.
03) Connection with a transmitter, but no DMX data.
The LED indicator lights up for 900ms and then blinks for 100ms (the LED blinks slowly).
When the wireless DMX communication is normal, the LED indicator is always ON.
The EventLITE 4/10 Q4 cannot receive a wireless DMX signal and a DMX
cable signal at the same time.
When the device is in Auto mode, Built-in program mode or Manual mode, please ensure that the
matching 2.4GHz wireless signal transmitter is OFF.
Connect the EventLITE to the Wireless DMX Signal Transmitter
The EventLITE cannot actively match a random wireless signal transmitter.
In order to create a wireless match, please check the manual of your wireless signal transmitter.
We advise you to use the W-DMX MicroBox F-1 G5 Transceiver (
50175 ) by WIRELESS SOLUTION (Fig. 08).
Fig. 08
Disconnect the Event LITE From the Wireless DMX Signal Transmitter
01)
Turn off/unlink the W-DMX. In order to do so, in main menu, press the UP/DOWN buttons to select 1:
DMX and press the ENTER button to enter the submenu.
02) Press the UP/DOWN buttons to select SIGNAL.
03) Press the ENTER button to enter the submenu. In order to unlink the EventLITE, you have to make sure
the fixture is a slave device. See 5. Master/Slave Mode (page 25) for more information.
04) Press the UP/DOWN buttons to select CLEAR and press the ENTER button to confirm.
05) The EventLITE will now be disconnected.