SHOWTEC 44060, Руководство пользователя

Страница: 35 / 40

34
Ordercode: 44060
EventLITE 4/10 Q4
189-195 Color 27 (R255, G000, B025, W050)
196-202 Color 28 (R255, G000, B025, W025)
203-209 Color 29 (R255, G000, B025, W000)
210-216 Color 30 (R000, G000, B000, W255)
217-223 Color 31 (R075, G075, B000, W255)
224-230 Color 32 (R000, G000, B100, W255)
231-255 Color 33 (R255, G255, B255, W255)
Channel 8 – Built-in programs
0-10
No function
11-40 RGB color flow
41-70 CMY color flow
71-100 RGBW color flow
101-130 RGBW+CMY color flow
131-160 RGB color switch
161-190 CMY color switch
191-220 RGBW color switch
221--255 RGBW+CMY color switch
Channel 9 – Built-in program speed
CH8 must be set between 11-255
0-255 Gradual speed adjustment, from slow to fast
Maintenance
The operator has to make sure that safety-related and machine-technical installations are to be
inspected by an expert after every year in the course of an acceptance test.
The operator has to make sure that safety-related and machine-technical installations are to be
inspected by a skilled person once a year.
The following points have to be considered during the inspection:
01)
All screws used for installing the device or parts of the device have to be tightly connected and
must not be corroded.
02) There may not be any deformations on housings, fixations and installation spots.
03) Mechanically moving parts like axles, eyes and others may not show any traces of wearing.
04) The electric power supply cables must not show any damages or material fatigue.
The EventLITE 4/10 Q4 requires almost no maintenance. However, you should keep the unit clean.
Otherwise, the fixture’s light output will be significantly reduced. Disconnect the mains power supply, and
then wipe the cover with a damp cloth. Do not immerse in liquid. Wipe lens clean with glass cleaner and
a soft cloth. Do not use alcohol or solvents.
The front lens will require weekly cleaning, as smoke-fluid tends to build up residues, reducing the light
output very quickly.
Keep connections clean. Disconnect electric power, and then wipe the DMX and audio connections
with a damp cloth. Make sure connections are thoroughly dry before linking equipment or supplying
electric power.