SHOWTEC 44060, Руководство пользователя

Страница: 23 / 40

22
Ordercode: 44060
EventLITE 4/10 Q4
1.1. Address
In this menu you can set the desired DMX starting address.
01)
Press the UP/DOWN buttons to set the desired DMX address. The adjustment range is between 001-
512.
02) Press the ENTER button to confirm your choice.
1.2. Channels
In this menu you can set the desired DMX channel mode.
01)
Press the UP/DOWN buttons to set the desired DMX channel mode. Choose one of the 3 options:
●
4 channels
● 6 channels
● 9 channels
02)
Press the ENTER button to confirm your choice.
1.3. Signal
In this menu you can link/unlink multiple EventLITEs, using W-DMX.
01)
Unlock W-DMX on all EventLITEs. See 1.4. W-DMX Unlock on page 23 for more information.
02) Set one EventLITE as a master device. See page 25 for more information.
03) Set the other EventLITEs as slave devices. See page 25 for more information.
04) In order to link, open this menu on the master device. The display will read PAIR. Press the ENTER
button on the master device to link it to the slave devices. The W-DMX LED indicators (06) on all
devices will be blinking quickly. Once the devices have been linked, the W-DMX LED indicators (06)
will be continuously on. You can now operate the master device and all slave devices will react the
same as the master device.
05) In order to unlink, open this menu on all the slave devices. The display will read CLEAR. Press the
ENTER button on all the slave devices to unlink them from the master device. Once the slave
devices have been unlinked, the W-DMX LED indicators (06) on the slave devices will turn off.