SHOWTEC 44060, Руководство пользователя

Страница: 13 / 40

12
Ordercode: 44060
EventLITE 4/10 Q4
Multiple EventLITEs (Master/Slave control)
01)
Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Use a 3-pin XLR cable to connect the EventLITE and other devices.
The pins: 1. Earth
2. Signal (-)
3. Signal (+)
04)
Link the units as shown in (Fig. 04). Connect a DMX signal cable from the first unit's DMX "out" socket
to the second unit's "in" socket. Repeat this process to link the second, third and fourth unit. You can
use the same functions on the master device as described on pages 23-24 (Manual, Auto or Built-in
programs). This means that you can set your desired operation mode on the master device and all
slave devices will react the same as the master device.
Multiple EventLITEs
( Master/Slave control)
Fig. 04