− ９ −
9. Product installation
(1) Installation environment
CAUTION
①
This product must be installed
indoors
only.
②
Do not install in an environment where explosive gases, etc., may be
present.
(Excluding CRH-
□□
E Series Mistresa)
(2) Installation method
CAUTION
①
Install in a horizontal
(level) manner to evenly
distribute the weight of the
drain pipe discharge and
the anti-vibration pads.
②
When installing the product
on top of another machine,
etc., secure it with bolts to
prevent shifting due to
vibration.
③
Leave a gap at the securing
bolts to allow the anti-
vibration pads to function
properly
(See Fig.1).
④
The liquid seal surface should
be 300mm or farther below
the drain pipe in order to
allow drain pipe discharge.
An optional floor stand
with a height of 600mm is
available (see Fig.2) (For
drain piping details, see
page 8, item (3) "Drain
tube piping").
⑤
Leave a 500mm margin of
space at all sides of the
product to permit filter
replacements, maintenance,
and inspections.
Fig.1
As viewed from "A"
2 to 3mm
Double nut
Gap
Anti-vibration pad
Welded bolt
Ａ
３００
ｍ
ｍ
Fig.2
A
