− 17 −
To install the filter box, insert it in
the posture shown above.
Remove the primary filter (the
thin one) first, then remove the
secondary filter (the thick one).
*When reinstalling, install the secondary
filter first, then the primary filter.
Install the primary filter (2 sheets)
and the secondary filter (2 sheets)
one sheet at a time, with their
"Genuine Mistresa Part" stamp on
the downstream (downwind) side.
(Installing both sheets at once
could cause positional deviations.)
6
7
End-filter replacement
Release the discharge-side clamp
and remove the back panel to
reveal the end-filter.
【
CAUTION
】
To prevent the back panel from
falling when removing it, support
the panel with the hands while
releasing the clamp.
8
Extract the end-filter.
9
* Install the end-filter with the
joint in the upper diagonal
posture shown above.
Joint