Shortridge Instruments AIRDATA ADM-880C, Руководство по эксплуатации

Страница: 14 / 73

ADM-880C 07/20/09 9
nn:nn:nnI
This display is used to set the INTERVAL TIME for the TIMED READ mode and is also used to display the time after
the setup has been completed. The display follows the [HH:MM:SS I] sequence, where HH is the hour, MM is the
minutes and SS is the seconds. The letter I at the right represents INTERVAL.
nn:nn:nnT
This message displays the time settings for the meter after the setup has been completed. The display follows the
[HH:MM:SS T] sequence, where HH is the hour, MM is the minutes and SS is the seconds. The letter T at the right
represents TIME. If the meter has been set to a 12 hour clock, the letter A for am or P for pm will be displayed to
the left of the letter T.
nnG n.nnnn
Displays a reading and its place in the reading sequence within its memory group during an AUTO or MANUAL
STORE sequence. Number of decimal places will vary.
nn NP 0
Indicates that the reading being displayed in an AUTO or MANUAL STORE sequence is a negative pitot tube
reading.
nn c nnnn
This message indicates that backpressure compensated air flow readings have been stored. The display shows the
reading and its order in the stored reading sequence.
nn ERASED
This message is displayed after a listed reading is erased. The erased reading will not be included in subsequent
calculations of statistics for the memory group.
nn u nnnn
This message indicates that nonbackpressure compensated air flow readings have been stored. The display shows
the reading and its order in the stored reading sequence.
nn
0
n.nnnn
Displays the number of readings in memory and the average of the readings. Displayed when the VIEW key is
pressed once during a MANUAL STORE sequence or after HALT during a AUTO STORE sequence. Number of
decimal places will vary.
3
n.nnnn
Displays the sum of the readings in memory. Displayed when the VIEW key is pressed twice during a MANUAL
STORE sequence or after HALT during a AUTO STORE sequence. Number of decimal places will vary.
F n.nnnn
Displays the standard deviation of the readings in memory. Displayed when the VIEW key is pressed five times
during a MANUAL STORE sequence or after HALT during a AUTO STORE sequence. Number of decimal places
will vary.
xx n.nnnn
This display indicates that the battery charge is nearly depleted. xx indicates the units for the reading. The meter
will also begin displaying LOCHARGE periodically.
xx n.nnnn
This display indicates that the battery is highly charged. xx indicates the units for the reading. The area of the
battery symbol that is dark will decrease incrementally as the battery charge declines.
xx
6
n.nnnn
This display indicates that the meter is in TREND mode and that the readings are remaining relatively constant. xx
indicates the units for the reading.
xx _ n.nnnn
This display indicates that the meter is in TREND mode and that the readings are increasing slowly. xx indicates
the units for the reading.