Automatic Tool Changer (ATC) Installation Manual • December 1, 2016
© Copyright 2016 ShopBot Tools, Inc.
page 8
Mount Dust Collection Bracket
Pry black plastic cap from top of Z-axis with a flat
head screwdriver. Pre-assemble two 1/4-20x1/2”
button head screws and two 1/4-20 T-nuts through the
dust hose guide bracket. It may be necessary to slit
the top sticker down the left side of the Z-axis extru-
sion. Slide the bracket down into the extrusion and
tighten the bolts. Replace black plastic cap.
Use hose clamps to run a 4” dust collection hose to
the dust skirt from an overhead dust system. Do not
connect hose until the end, due to possible inter-
ference through the rest of the installation.
