PAGE 10
STORAGE
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
Suction weakens or
cleaner runs hot
Misitng in the
exhaust air
Clogged filter
Saturated filter
Brush dirt from filter. If condition continues, change
filter.
Replace saturated filter with a dry filter.
BEFORE DOING ANY WORK ON YOUR VACUUM, TURN THE UNIT OFF AND DISCONNECT THE PLUG
FROM THE WALL OUTLET.
Air leak
Check all fittings for tight fit (nozzles, hose, etc.)
Check that tank cover is sealed properly.
56. Before storing your vacuum
cleaner the tank should be
emptied and cleaned. The
power cord can be wrapped
around the cord wraps on
the side of the tank cover.
FIGURE 33
.
Not standard
with all models.
If your
vacuum does not include cord
wraps, power cord can be
wound around the tank cover
for your convenience.
NOTE: THE CLEANER
SHOULD BE STORED
INDOORS.
FIGURE 33
Obstruction in hose
or nozzle
Check nozzle, hose, etc. for obstructions, and
remove if present.
WARNING!
IF ANY OF THE MOTOR HOUSING PARTS SHOULD BECOME DETACHED OR BROKEN, EXPOSING THE MOTOR
OR ANY OTHER ELECTRICAL COMPONENTS, OPERATION SHOULD BE DISCONTINUED IMMEDIATELY TO
AVOID PERSONAL INJURY OR FURTHER DAMAGE TO THE VACUUM. REPAIRS SHOULD BE MADE BEFORE
REUSING THE VACUUM.
