Shop fox W1838, Руководство пользователя

Страница: 21 / 37

-18-
Model W1838 (For Machines Mfd. Since 6/16)
O
PE
R
ATIO
NS
Miter.Sanding
The most efficient way to get a perfect miter is to cut
the workpiece long and sand it to the desired dimension.
To.perform.miter.sanding.operations,.do.these.steps:
1. Loosen the knob on the miter gauge, adjust the
angle to the desired point, and tighten the knob.
Note : For 90
°
horizontal sanding, set miter gauge to 0
°.
2. Slide the miter gauge into its slot and use it to hold
your workpiece in position.
Note : The miter gauge can be used in either
direction in the slot to achieve the proper relation
of the workpiece to the disc.
3.
Using light pressure, move the workpiece slowly back
and forth across the disc, as shown in Figure.13 .
Figure 13 . Disc sanding with a miter
gauge.
Compound angles can be sanded with the table tilted and
the miter gauge angled off of 90 ° .
To.perform.angle.sanding.operations,.do.these.steps:
1. Set table tilt to desired angle (see Figure.15
).
Note : The table can be positioned from 0˚ to 45˚,
relative to the sanding disc.
2. Set angle of miter gauge.
3. Slide miter gauge into miter slot and use miter
gauge to hold workpiece in position.
4.
Using light pressure, move workpiece slowly back
and forth across the disc, as shown in Figure.15 ).
Compound.Angle.Sanding
Figure 15 . Mitering with the table angled.
Angle Knob
Figure.14.
Miter gauge adjustments.
Scale
Pointer
Miter Gauge
Lock Knob