Shop fox W1838, Руководство пользователя

Страница: 14 / 37

-11-
Model W1838 (For Machines Mfd. Since 6/16)
SE
TU
P
Unpacking
SETUP
Figure.3.
Inventory.
A
H
I
B C
D
E
F
G
Keep. machine. disconnected. from.
power.until.instructed.otherwise.
This machine has been carefully packaged for safe
transportation. If you notice the machine has been
damaged during shipping, please contact your authorized
Shop Fox dealer immediately.
Inventory
Box.Contents.(Figure.3). Qty
A.
Combo Sander ..............................................1
B. Backstop ....................................................1
C.
Disc Sanding Table .........................................1
D. Sanding Table Lock Knobs M6-1 x 18 ...................2
E.
Backstop Angle Lock Knob M5-.8 x 10 ..................1
F. Flat Washers 6mm (Sanding Table Lock Knobs) .......2
G.
Flat Washer 5mm (Backstop Angle Lock Knob) .......1
H. Hex Nut M5-.8 (Backstop Angle Lock Knob) ...........1
I.
Miter Gauge ................................................1
The following is a list of items shipped with your machine.
Before beginning setup, lay these items out and inventory
them.
Note: If you cannot find an item on this list, carefully
check around/inside the machine and packaging materials.
Often, these items get lost in packaging materials while
unpacking or they are pre-installed at the factory.
SUFFOCATION HAZARD!
Immediately discard all
plastic bags and packing
materials to eliminate
c h o k i n g / s u f f o c a t i o n
hazards for children and
animals.
The following items are needed to complete the set up
process, but are not included with your machine:
Description. Qty
• Open-End Wrench 8mm ...................................1
• Open-End Wrench 13mm ..................................1
• Hex Bolt M8-1.25 (length varies) ........................2
• Flat Washers 8mm ..........................................4
• Lock Washers 8mm .........................................2
• Hex Nuts M8-1.25 ...........................................2
• 6" Machinist's Square .......................................1
Items.Needed.for.Set.Up