-16-
Model W1838 (For Machines Mfd. Since 6/16)
O
PE
R
ATIO
NS
OPERATIONS
General
This machine will perform many types of operations
that are beyond the scope of this manual. Many of these
operations can be dangerous or deadly if performed
incorrectly.
The instructions in this section are written with the
understanding that the operator has the necessary
knowledge and skills to operate this machine. If at any
time you are experiencing difficulties performing any
operation, stop using the machine!
The overview below provides the novice machine operator
with a basic understanding of how the machine is used
during operation, so the machine controls/components
discussed later in this manual are easier to understand.
Due to its generic nature, this overview is
NOT
intended
to be an instructional guide.
To. reduce. your. risk. of. serious. injury.
or. damage. to. the. machine,. read. this.
entire.manual.BEFORE.using.machine.
To. reduce. the. risk. of. eye. injury. and.
long-term. respiratory. damage,. always.
wear. safety. glasses. and. a. respirator.
while.operating.this.machine.
If you are an inexperienced operator,
we strongly recommend that you read
books or trade articles, or seek training
from an experienced operator of this
type of machinery before performing
unfamiliar operations.
Above.all,.safety.
must.come.first!
To.complete.a.typical.operation,.the.operator.does.the.
following:
1.
Examines workpiece to make sure it is suitable for
sanding.
2.
Adjusts table tilt, if necessary, to correct angle for
operation.
3.
Makes sure sandpaper is in good condition and
properly mounted.
4.
Puts on safety glasses and a respirator, and turns
dust collection system
ON
.
5.
Starts sander.
6.
Makes sure sanding belt is tracking properly.
7.
Feeds workpiece slowly into sandpaper while
maintaining firm pressure on workpiece against
table, miter gauge, or backstop. Keeps hands and
fingers away from moving sandpaper.
8.
Stops the machine.
Содержание W1838
Страница 34: ...Model W1838 For Machines Mfd Since 6 16...
Страница 37: ......