Shining3D Aoralscan 2 Скачать руководство пользователя страница 12

Страница: 12 / 108

Intraoral Scanner User Manual

Table 2-2 Labels and symbols on the carry box/package

Indicates that the user should read the operating instructions for

information on using this equipment.

Indicates that the final disposal of the device complies with Waste

Electrical & Electronic Equipment and waste regulations. It can

no longer be used for its intended purposes.

General warning – caution.

Indicates that the contents of the transport package are fragile

and therefore shall be handled with care.

Indicates that the transport package shall be kept dry.

Indicates correct upright position of the transport package.

Indicates the stack limits. A maximum of 6 units of identical

packages may be stacked.

Indicates temperature limits. The product must be stored in the

original shipping package in environments between -25°C and

60°C.

Indicates the humidity limits. The product must be stored in the

original shipping package in environments with 30% to 75%

relative humidity and noncondensing.

Indicates the atmospheric pressure limits. The product must be

stored in the original shipping package in environments between

700 hPa and 1060 hPa air pressure.

Indicates that the material shall be recycled.

Содержание Aoralscan 2













































































































Результаты поиска

Содержание Aoralscan 2

Отзывы:

Бренды по названию

Популярные бренды

Shining3D Aoralscan 2, Руководство пользователя

Результаты поиска

Содержание Aoralscan 2

Отзывы:

Бренды по названию

Популярные бренды