Shining 3D EinScan HX, Руководство пользователя

Страница: 67 / 83

EinScan HX User Manual
66
Figure 3-55 Mirror
3.8 Measurement
After meshing, the Measurement menu will be available on the top. Or click Measurement on the
navigation bar, and import data.
The measurement interface and the post-processing interface share the same data.
Click to enter the measurement interface.
Click to select the file to be measured; or directly drag STL, OBJ or PLY files in format onto the
measurement interface. Drag texture ply file onto the interface and non-texture data will be shown.
3.8.1 Create Features
Click feature to display the menu, click again to close the menu.
Feature Menu Display of Features
Figure 3-56
Click on the corresponding icon to create points, lines, planes.
Then select the creation method and follow the instructions, click
Create to generate, or Close to
cancel and close the window.
The features created displaying in gray, the selected feature is in Red. In the feature list, click
delete
to remove (Delete action cannot undo).
Table 3-14
Feature
Creation
Method
Requirement Description
Point
Selected Points —
Click on the data to select a point.
Click create to create a point.
Line-Plane
Interface Line and Plane should be
created in advanced Click on the created line, or select it
on the dropdown.