Shining 3D EinScan HX, Руководство пользователя

Страница: 66 / 83

EinScan HX User Manual
65
3.7.8 Cutting Plane Tool
Define a plane by drawing a straight line. Delete the selection and close the mesh at the intersection.
Use the cutting plane to align the mesh to the CSYS.
Steps
1.
Hold down the Shift+ LMB and drag the cursor to create a plane. The front is above the plane.
2. Click intersect plane , the scanned data in the reverse direction of the plane is displayed in red (the
data to be deleted); if you select "Reverse Selection", the scanned data in the forward direction of
the plane is displayed in red (the data to be deleted).
3. Select
Delete Selection and Close Intersection or Delete Selection .
-Delete the selection and close the intersection: delete the red area and fill in the scan data that
coincides with the created plane.
-Delete selected area: delete the red area.
4. Click Orient Based On Plane , the scanning model will be readjusted according to the direction of
the plane arrow.
5. Click Apply to delete the red area.
6. Click Confirm to save the current result and close the Cutting Plane Tool window.
3.7.9 Mirror
Mirror the mesh through a plane defined by a straight line.
After mirroring, texture remapping cannot be performed. You should complete texture remapping
before performing mirroring.
Steps
1.
Hold down Shift+LMB and drag the cursor to create the center axis.
2. Check keep Original Grid Data , the original scan data will be retained; If this box is not checked,
the original scan data will be deleted and only the mirrored data will be saved.
3. Click Apply and the symmetry data will be copied with the central axis.
4. Click Confirm to save the current result and close the Mirror window.