ShinewayTech CAA-100 Series, Руководство пользователя

Страница: 13 / 48

CAA-100 Series User’s manual
Shineway Technologies, Inc. - 7-
charging icon;
3. Connect an external adapter, with battery full - display adapter icon;
4. Without adapter, only battery - display battery icon, divided into 5
levels. If battery is low voltage system will alarm
Calibration state: (valid)On or (unvalid) off
Note: Only when calibration is valid(on), user can start measurement.
Marker information
Limit line information
Measurement
information
Measurement points
：
137
、
275
、
551
、
1103
Start and stop frequency and distance
Function menu 1
Cal mode
：
enter calibration interface
Parameter
：
enter parameter setting menu. If user in the freq-return loss/
freq-VSWR/cable loss measurement mode, it will go into frequency
parameter setting menu; If user in the DTF-return loss/DTF-VSWR
measurement mode ,it will go into DTF parameters menu, more
parameters and information will be included in this menu.
Display
：
For details see later chapter
Data-> Mem
：
Save current data to memory
Note
：
only one data can be save to the memory
Auto Run
：
Start continuous measurement, clicks again to stop.
Note: while measuring and Auto Run state is on, some functions are
prohibited. If users want to use these function again, need to click the
menu once again and check the state is off.
Single run
：
Start single measurement, the system enters the idle state after
measurement
Function menu 2
RL/SWR
：
fast switching between the return loss and VSWR measurement
Marker
：
For details see later chapter
Limit
：
For details see later chapter
Scale
：
For details see later chapter
Smooth/Average
：
turn on/off Smooth/Average function. User can
utilize these function to observe and analyze measurement dat.
File
：
For details see later chapter
Main display area Display the measurement results and other information.
3.4 RF Power Meter Interface