3
Safety Precautions
A splitboom attachment has the potential
to do serious damage if misused, abused or
mishandled. To reduce the risk of injury,
you must maintain control at all times, and
observe all safety precautions during op-
eration.
Never permit a person without
training or instruction to operate this
tool!
THE SPLITBOOM ATTACHMENT
IS NOT INSULATED AGAINST
ELECTRICAL SHOCK!
Approaching
or contacting electrical line with the
pruner could cause death or serious
injury. Keep the attachment at least 10
meters away from electrical lines or
branches that contact electrical lines.
Warning Labels
Warning labels affixed to the
machine are as follows:
Read and follow this manual,
make sure anyone using this
unit does likewise. Failure to
do so could result in serious
personal injury or machine failure. Keep
this manual for future reference.
Always wear a hard hat
to reduce the risk of head
injuries during operation of
this machine. In addition,
always wear eye and hearing protection.
Shindaiwa recommends wearing a
face shield as additional face and eye
protection.
Wear nonslip heavy-duty work
gloves to improve your grip on
this unit. Wear sturdy footwear
with nonslip soles to provide
good footing. Steel-toe safety
boots are recommended. Wear
snug-fitting clothes that also
permit freedom of movement.
Never operate this tool or
any other power equipment if
you are tired, ill, or under the
influence of alcohol, drugs, or
any substance that could affect your ability
or judgement.
Keep bystanders at least
15 meters away from the
operating pruner to reduce the
risk of being struck by falling
objects or thrown debris.
Never cut off branches
over your head. The cut-off
branches may hit you and
cause serious injury.
NOTE:
For specific maintenance and safety
information for your Shindaiwa Multipurpose
Engine, consult the owner’s manual
provided with that unit. If it has been
misplaced, contact a Shindaiwa Dealer for a
replacement.
WARNING!
Do not make unauthorized
modifications to this unit.
DANGER!
Never operate the pruner tool
at an angle greater than 60°
in order to reduce the risk of
being struck by falling objects
during operation.
Beware of kickback!
Kickback
can occur whenever the tip of
the guide bar touches an object
while the saw is operating.
Kickback may force the bar up
and back toward the operator with light-
ning-like speed!
Beware of pinching.
Pinching the saw along the tip of
the guide bar may force the bar
back rapidly toward the operator.
Pinching can occur whenever wood closes
in around the moving chain.
Never touch the saw chain when
starting the engine and while
operating this maching.
Chain of fill/oil pump
Содержание SBA-P24
Страница 42: ...Italiano NOTA IT_14 ...
Страница 43: ...Italiano NOTA IT_15 ...