Shindaiwa DGW300M, Руководство владельца и оператора

Страница: 19 / 36

- 16 -
⑤
Turn the starter switch to
『
START
』
and then the engine starts by the starter
motor.
⑥
Release the starter switch, as soon as the engine has started.
⑦
Keep the engine idle for about 5 minutes.
< Caution >
•
Do not drive the starter motor for more than 15 seconds successively.
•
If you need to restart, wait for 30 seconds or more before reattempt.
•
Once the engine has started, never turn the starter switch to
『
START
』
.
■
Restart after stopping due to fuel shortage
This equipment is incorporated in automatic vacuuming air feature. Therefore, even
though the engine stops due to running out of fuel, you can restart the engine easily
by the following steps.
①
Turn the breaker to
『
OFF
』
.
②
Turn the Starter Switch to
『
STOP
』
.
③
Fill the fuel.
④
Turn the idle control switch to
『
ECO
』
or
『
AUTO
』
.
⑤
Turn the starter switch to
『
START
』
and drive the starter motor for about 10
seconds.
⑥
Release the starter switch, as soon as the engine has started.
⑦
Wait for about 1 minute to vacuum the air out. The engine speed becomes
stable when the air is extracted.
< Caution >
•
Never turn the engine high speed or connect the loads until the air is extracted
completely (the engine speed becomes stable).
7-2
．
． ．
．
Stopping
①
Turn the breaker to
『
OFF
』
.
②
Turn the idle control switch to
『
ECO
』
or
『
AUTO
』
.
③
Keep the engine idle (cooling down) for about 5 minutes.
④
Turn the starter switch to
『
STOP
』
.
⑤
After the engine has stopped, turn the every fuel lever to
『
CLOSE
』
.
< Caution >
•
When the engine does not stop in spite of turning the starter switch to
『
STOP
』
,
Turn the fuel lever to
『
CLOSE
』
, then the engine will stop in a few minutes.
In this case, be sure to consult with authorized distributor and ask to repair.
•
Do not attempt to turn to
『
STOP
』
position while actual welding or utilizing AC power
source, it may cause the serious damage on the unit.
CLOSE
OPEN
FUEL LEVER
BREAKER
IDLE CONTROL SWITCH
STARTER
SWITCH
PREHEAT LAMP