Shindaiwa DGW300M, Руководство владельца и оператора

Страница: 11 / 36

- 8 -
5-1
.
. .
.
Eco Welding
／
／ ／
／
Eco Generating
The equipment is incorporated in Eco Welding
／
Eco Generating features that are
aimed at performing the lower noise, the lower fuel consumption and the lower gas
emission than conventional models. When you turn the idle control switch to
『
ECO
』
,
the optimum engine speed will be adjusted automatically by load with green “ECO
DRIVE” indicator lamp turned on.
< Caution >
•
The optimum engine speed will be adjusted
automatically while using welding output
only.
•
The engine speed will be set slightly lower
than the rated speed while using generating
output only.
•
The engine speed will be set as rated
speed while using simultaneous use of
welding and generating.
•
The engine speed will be set automatically as low speed at no load.
•
Always turn the idle control switch to
『
HIGH
』
, when using motor with large
capacity or the load is incorporated with any magnet switch.
•
When the load of less than 1A is connected to use, the feature does not function
sometimes. Therefore, turn the idle control switch to
『
HIGH
』
.
•
When welding operation or electric supply performs alternately or intermittently,
turn the idle control switch to
『
HIGH
』
.
5-2
．
． ．
．
Display
The equipment incorporates in digital display. It displays
『
DC CURRENT
』
,
『
AC
VOLTAGE
』
,
『
HOUR
』
successively, by changing the display selector switch.
< Caution >
•
During no load operation, the preset current
is indicated on the display with “PRESET”
indicator lamp turned on.
•
While welding, the actual current is
indicated on the display with “ACTUAL”
indicator lamp turned on.
•
During operation, AC voltage meter always
displays the voltage in 200/220V AC output
both at the breaker position
『
ON
』
and
『
OFF
』
.
5-3
．
． ．
．
Voltage Reducing Device
Danger : Injuries
•
Frequency change should be done, only after stopping the engine. Moreover,
close doors and place locks during operating this equipment, to avoid
injuries by unintentional contact with cooling fan and fan belt.
5
. . . .
Equipment
ECO LAMP
IDLE CONTROL
SWITCH
DISPLAY SELECTOR
SWITCH
ACTUAL LAMP
PRESET LAMP