Shindaiwa DGW300M, Руководство владельца и оператора

Страница: 12 / 36

- 9 -
Caution : Burns
•
Do not touch the engine and muffler during operation and immediately after
stopping the equipment, for the temperature can reach extremely high.
The equipment incorporates VRD (Voltage
Reducing Device) feature, for the purpose
of protecting an operator from electric
shock with welding output.
When the VRD selector switch is turned to
『
ON
』
, the voltage changes to 35V or
lower during no welding period.
5-4
．
． ．
．
AC Voltage Adjustment Dial
Danger : Injuries
•
Frequency change should be done, only after stopping the engine. Moreover,
close doors and place locks during operating this equipment, to avoid
injuries by unintentional contact with cooling fan and fan belt.
Caution : Burns
•
Do not touch the engine and muffler during operation and immediately after
stopping the equipment, for the temperature can reach extremely high.
Adjust the dial whenever the AC output
voltage adjustment is necessary.
< Caution >
•
When raising the voltage, the current is
decreasing. (Use the output within the
output capacity.)
•
In you raise the voltage exceeding the
allowable voltage range, which causes the
damage to the loads.
5-5
．
． ．
．
Frequency Change
Danger : Injuries
•
Frequency change should be done, only after stopping the engine. Moreover,
close doors and place locks during operating this equipment, to avoid
injuries by unintentional contact with cooling fan and fan belt.
Caution : Burns
•
Do not touch the engine and muffler during operation and immediately after
stopping the equipment, for the temperature can reach extremely high.
AC VOLTAGE ADJUSTMENT DIAL
DECREASE INCREASE
VRD SELECTOR SWITCH