Shel lab BACTRON300, Инструкция по установке и эксплуатации, Страница: 67 / 86

67 | P a g e
USER MAINTENANCE (CONTINUED)
Disinfecting
Disinfect the BACTRON on a regular basis. Perform the following steps to carry out a complete
disinfection of the workstation:
1. Turn the unit off. Open all doors and carry out your laboratory, clinical, or production space
disinfection protocol.
2. If possible, remove all interior accessories (shelf spacers, racks, and other non-attached
items) from the chamber when disinfecting. Disinfect all corners, the incubator interior(s),
and the pass box interior. Take special care when cleaning around the pass box doors and
arm port door gaskets so as not to impair the positive seal.
3. Disinfect the BACTRON using commercially available disinfectants that are non-corrosive,
non-abrasive, and suitable for use on stainless steel, painted surfaces, and acrylic glass.
Contact your local Site Safety Officer for detailed information on the disinfectants
compatible with your cultivation or culturing applications.
4. Do not use overtly volatile disinfecting agents. Chlorines, amphyls, and quaternary
ammonias will evaporate into the chamber environment. Concentration in the chamber
atmosphere will increase over time, potentially leading to inhibited growth or metabolic
symptoms in sample populations.
5. After completion of your institutional protocol, allow all disinfectants to evaporate
completely. Wipe down all surfaces except the door sensors with distilled water and
Zephiran until the workstation no longer has a volatile odor. Use nonabrasive wipes.
Figure 33: Pass Box Door Sensor
Pass Box
Door Sensor