Shel lab BACTRON300, Инструкция по установке и эксплуатации, Страница: 21 / 86

21 | P a g e
Figure 14: Foot Pedal to Gas Out Ports
INSTALLATION (CONTINUED)
C
ONNECT THE
F
OOT
P
EDAL
C
ONTROLS
The foot pedal controls allow the user to apply vacuum and AMG to the arm ports in order to
cycle the ports and attached sleeves. Cycling is done prior to entering the chamber workspace.
Connect the foot pedal supply line to the arm port door assemblies
1. Place the foot pedal assembly on the floor below the arm port doors.
2. Connect the branched supply line to the foot pedal assembly.
a. Attach the single end to barb adaptor on the assembly.
b. Connect the branching lines to the two brass barb adapter fittings on the inner sides of
the arm port door assemblies.
Figure 15: Foot Pedal to Arm Port Assemblies
Connect the foot pedal supply lines to the BACTRON VAC
and GAS OUT ports.
1. Connect one of the black tubing lines provided with the
assembly to the VAC barb adaptor on the Foot pedal.
a. Connect the other end of that line to the VAC OUT
port.
2. Connect the other gas tubing line to the GAS barb
adaptor on the foot pedal assembly.
a. Connect the other end of that line to the BACTRON
GAS OUT port.
To Vacuum Supply Source
To Foot Pedal VAC Port
To Foot Pedal GAS Port To AMG Cylinder (Single
Gas Configuration)
Figure 16: All Lines Connected
Branched
Supply Line
Arm Port Assemblies