9
Link to a mobile printer
The s ck reader is fully compa ble with a thermal Bluetooth printer. The mobile printer recommended
and supplied by Shearwell is an Able Systems AP1300BT.
Power bu on
Power bu on
Release catch for cover
Release catch for cover
Cover
Cover
Indicator light
Indicator light
Printer on and off
Press the power bu on once to turn the printer on. The printer turns itself off automa cally if it has not
been used for a few minutes. You can turn the printer off manually by opening the cover and double-clicking
the power bu on.
Ba ery charging
The ba ery can be recharged using either the mains charger or the car charger supplied. Charging the
printer ba ery from fl at to full should take about three hours.
Indicator light
Steady green = Normal opera on
Long green, short red = Ba ery is low
Short green, long orange = Ba ery charging
Blinking red = Error
Paper roll installa on
To insert a new roll of paper, slide the catch down and away from the paper slot.
The cover for the paper container will release and open. Remove the
old paper core and insert a new roll of paper.
WARNING
:
Use the correct adapter for charging the printer. Do not confuse the s ck reader ba ery
chargers with the printer chargers. The mains and car charger for the printer are labelled
Printer
Charger.
