22
Link to a weigher - EziWeigh7I
The SDL440S s ck reader can be linked to a weigher that has Bluetooth. Devices with Bluetooth will have
the Bluetooth symbol on the front.
The fi rst step to link your s ck reader to an EziWeigh7I is to fi nd the Bluetooth ID of the weigher.
1. Push the power bu on to turn on the weigher.
2. Push the
Menu
bu on.
3. Use the bo om arrow to scroll down through the func ons to
Setups...
4. Push
Enter
. Use the bo om arrow to scroll down through the func ons to BT Address
5. Write down the BT address on a piece of paper, leaving out the colons. The example in the photo
above would be BT Address 00A0963D2FA3.
6. Press the
Escape
bu on twice to exit.
Power bu on
Enter bu on
Escape bu on
Arrow to scroll up
Arrow to scroll down
Bluetooth symbol