Sharper Image EVSI-AR60, Инструкция по эксплуатации и информация о гарантии

Страница: 6 / 14

10 11
Cleaning and Maintenance
We recommend that the air cleaner be cleaned at least once a month and before
storage.
• Turn the air cleaner OFF at the main switch and unplug it from the outlet.
• Use a dry cloth to clean the external surfaces of the air cleaner.
• The grill plate may be cleaned with a damp cloth or the brush attachment of your
vacuum cleaner.
DO NOT USE WATER, WAX, POLISH OR ANY CHEMICAL SOLUTION
Replace UV-C Bulb Indicator
The UV-C Bulb is equipped with a REPLACE UV-C BULB indicator to let the user
know it is time to replace the bulb. When the bulb needs to be changed, the
REPLACE UV-C BULB indicator will light up on the control panel. Once the UV-C bulb
has been replaced, press and hold the REPLACE UV-C BULB button to reset the
indicator until it beeps.
Replacing UV-C Bulb
1. Open and remove the rear grill
2. Remove the upper HEPA filter
3. Use screwdriver to remove two screws and detach the metal UV bulb cover
4. Grasp the UV bulb and pull it from the bulb socket
5. Replace with new UV-C bulb and push it into the bulb socket
6. Replace the metal UV bulb cover
7. Replace the rear grill
NOTE:
UV-C bulb contain Mercury, Hg. Dispose of according to Local, State and
Federal Law / www.lamprecycle.org
Clean Filter Indicator
The air cleaner is equipped with a CLEAN FILTER indicator to let the user know when
it is time to clean the HEPA filter, about every 480 hours of use. When the HEPA filter
is ready to be cleaned, the LED CLEAN FILTER indicator will light up on the control
panel.
If the air cleaner is used daily, we recommend cleaning the HEPA filters more
frequently.
Once the HEPA filter has been cleaned, press and hold the CLEAN FILTER button to
reset the Indicator until it beeps.
Cleaning the HEPA Filters
Make sure that the air cleaner is turned OFF and unplugged from the outlet before
cleaning.
1. Open the rear grill by gently pushing
down on the tab on the top of the
grill plate.
2. Open the plate outward until the tabs
at the bottom of the grill plate easily
slide away. from the unit.
3. Remove the HEPA filters from the
main unit.
Note:
There are two HEPA filters in
this air cleaner
4. Use the brush attachment with
your vacuum cleaner. Run the
attachment along both sides of
the HEPA filters, cleaning thoroughly
between the accordion folds of the
filters.
Fig. 5
Fig. 6
Fig. 7
Fig. 8