Sharp XV-Z30000 Operation, Руководство по эксплуатации

Страница: 52 / 92

50
Signal Type Setting
When using an input mode of HDMI1, HDMI2, or
COMPUTER, set the signal type to the
corresponding input signal type (RGB or YPbPr).
Selectable
items
Description
Auto Automatically selects the appropriate
input signal between RGB and YPbPr.
RGB Set when RGB signals are received.
YPbPr Set when YPbPr signals are received.
5
Setting the Video Setup
Selectable
items
Description
0 IRE Sets the black level to 0 IRE.
7.5 IRE Sets the black level to 7.5 IRE.
This function is available for the following
signal.
- 480
I
•
Note
6
Adjusting the Dynamic Range
An optimum picture may not be displayed if an
HDMI-capable device’s output signal type and
the projector’s input signal type do not match.
If this should occur, switch “Dynamic Range”.
Selectable
items
Description
Auto In most circumstances, “Auto” should
be selected.
Standard When the black levels of the image
show banding or appear faded, select
the item that results in the best picture
quality.
Enhanced
7
Signal Info
Input signal information is displayed.
Menu operation
n
Page 42
Computer Image Adjustment (“SIG-ADJ” Menu)
(Continued)